Skip to main content

WIP MG IJ: The Start! :D

Started disassembling my IJ this afternoon and did some nubmark fixing and started painting the frame..

Prepping the tools I'll be using..


Parts that I'll be painting~





The lower portion of the frame will be painted probably by tomorrow :)




There are some deep nubmarks on this parts, so I sanded it a bit and put some putty~





And painted the upper part of the frame, here are some of the photos taken earlier :D




Comparison on the painted~unpainted arm..

That's it for this post! :D

Comments

  1. AnonymousDecember 29, 2011 at 5:03 PM

    Hi Sir. What paint did you use?

    ReplyDelete
    Replies
    1. Niko Mr. PinkJanuary 23, 2012 at 2:09 AM

      I apologize for the UBER LATE REPLY..The paint I used for the frame was Kobe's Chrome :)

      Delete

Post a Comment

Popular posts from this blog

What's Inside The Box: HG Shaldoll

Post a Comment
Read more

Mr. Pink tried using 'Future' Pledge :D

I was looking for a cheap alternative for gloss topcoat to do my panel wash on my IJ since Bosny's Clear Gloss is too thick for me, and remembered that I saw on sir DC23's blog that he uses this Future Pledge to do the job, also, I asked sir T.V.A. *The Virgin Angel* with regards to using Pledge/Future for topcoating before panel wash..and I bought one right away XD..anyway, here are the photos of what I did on some scraps XD.. What I did was painted the part chrome and then, applied Future/Pledge on it.. Verdict: Seriously, it's so EASY to use. You don't have to do something like mix it with other stuffs before applying on the kit. You don't have to even worry about brush marks/strokes since it's self leveling. And it's shiny! XD So, if you guys are looking for a cheap alternative for your gloss coat, I highly recommend this one XD.. Till then! :D
2 comments
Read more

HG Shaldoll Ver. Odium WIP #01

Did something to my HG Shaldoll :D (This is btw, our Brando Bell Group Build) First of, this is what I plan on doing on it's backpack. Next, I did some cutting on the backpack in order for me to attach the thing that will hold the TA's boosters. Then I trimmed down the part that will hold the Tactical Arm's boosters, so it can fit in. I then attached the boosters on the backpack of the Shaldoll. Next is, I worked on the head. The eye lens for me is too big, so I decided to make it a bit smaller somehow :). Using a .5mm HIPS (High Impact Plastic Sheets) I did this. Sanded the putty I applied, and primed it to see if there are still something to work on. Still needs a lot of work on the head though haha :)). Removed the design on the body, and replaced it with a koto part. And oh! Look! It can transform now! haha! I also added wings on the shoulder armor, still working on it. Till next update~
Post a Comment
Read more