Brando Bell Unit Group Build Update! [Member's List!]

Minimum requirements met, at now..were on the planning stages of when and how long the GB will last.. :D

Below is the current list of the members of the GB :D..

HGUC LOTO
Derrick Bloodedge
Kevin Samaniego
Shaq Phantomhive
Jeremy Macalino
Kim Dominguez

HGUC JESTA
David Ceremonia
Niko Barcelon
Jigs Odin
Nichols Sayson
Tam Santos

HGUC GM III
Zen Filtzgriff
Erick Tubiera
Bok Cruz
Romulo Terrado

HGUC ReZEL [Normal/CMD Ver.]
Setsuna F. Exia
Stephen Tuazon
Aaron Tancungco
Billy Potz

Ohhhh...I'm so excited! XD..

Comments

What's Inside The Box: HG Shaldoll

Mr. Pink tried using 'Future' Pledge :D

I was looking for a cheap alternative for gloss topcoat to do my panel wash on my IJ since Bosny's Clear Gloss is too thick for me, and remembered that I saw on sir DC23's blog that he uses this Future Pledge to do the job, also, I asked sir T.V.A. *The Virgin Angel* with regards to using Pledge/Future for topcoating before panel wash..and I bought one right away XD..anyway, here are the photos of what I did on some scraps XD.. What I did was painted the part chrome and then, applied Future/Pledge on it.. Verdict: Seriously, it's so EASY to use. You don't have to do something like mix it with other stuffs before applying on the kit. You don't have to even worry about brush marks/strokes since it's self leveling. And it's shiny! XD So, if you guys are looking for a cheap alternative for your gloss coat, I highly recommend this one XD.. Till then! :D

HG Shaldoll Ver. Odium WIP #01

Did something to my HG Shaldoll :D (This is btw, our Brando Bell Group Build) First of, this is what I plan on doing on it's backpack. Next, I did some cutting on the backpack in order for me to attach the thing that will hold the TA's boosters. Then I trimmed down the part that will hold the Tactical Arm's boosters, so it can fit in. I then attached the boosters on the backpack of the Shaldoll. Next is, I worked on the head. The eye lens for me is too big, so I decided to make it a bit smaller somehow :). Using a .5mm HIPS (High Impact Plastic Sheets) I did this. Sanded the putty I applied, and primed it to see if there are still something to work on. Still needs a lot of work on the head though haha :)). Removed the design on the body, and replaced it with a koto part. And oh! Look! It can transform now! haha! I also added wings on the shoulder armor, still working on it. Till next update~

Mr. Pink

Search This Blog