Skip to main content

Progress so far (WIP Strike Freedom FBM)

I'm already done painting the whole frame and some of the armor parts of my SF, and if you'll ask me right now..I think I can finish this guy by this week. The only problem that's stopping me on finishing this guy is the Flat White that's not available here in my place. YES, it's NOT available..I already looked/asked EVERY HARDWARE here @ Castillejos Zambales, and at Olongapo! which pisses me off <_<..anyway, here's my progress so far..


Till my next post! :D

Comments

  1. AnonymousMarch 15, 2011 at 4:51 PM

    Flat white's good. But if you don't have any alternatives, then you can try using gloss instead. Then, try buying a clear paint (flat) after. It will kill the shine and protect the paint at the same time.

    ReplyDelete
  2. Niko Mr. PinkMarch 29, 2011 at 7:24 AM

    will take note of that sire~ :D

    ReplyDelete

Post a Comment

Popular posts from this blog

What's Inside The Box: SD Kshatriya

Post a Comment
Read more

Mr. Pink tried using 'Future' Pledge :D

I was looking for a cheap alternative for gloss topcoat to do my panel wash on my IJ since Bosny's Clear Gloss is too thick for me, and remembered that I saw on sir DC23's blog that he uses this Future Pledge to do the job, also, I asked sir T.V.A. *The Virgin Angel* with regards to using Pledge/Future for topcoating before panel wash..and I bought one right away XD..anyway, here are the photos of what I did on some scraps XD.. What I did was painted the part chrome and then, applied Future/Pledge on it.. Verdict: Seriously, it's so EASY to use. You don't have to do something like mix it with other stuffs before applying on the kit. You don't have to even worry about brush marks/strokes since it's self leveling. And it's shiny! XD So, if you guys are looking for a cheap alternative for your gloss coat, I highly recommend this one XD.. Till then! :D
2 comments
Read more

HG Shaldoll Ver. Odium WIP #01

Did something to my HG Shaldoll :D (This is btw, our Brando Bell Group Build) First of, this is what I plan on doing on it's backpack. Next, I did some cutting on the backpack in order for me to attach the thing that will hold the TA's boosters. Then I trimmed down the part that will hold the Tactical Arm's boosters, so it can fit in. I then attached the boosters on the backpack of the Shaldoll. Next is, I worked on the head. The eye lens for me is too big, so I decided to make it a bit smaller somehow :). Using a .5mm HIPS (High Impact Plastic Sheets) I did this. Sanded the putty I applied, and primed it to see if there are still something to work on. Still needs a lot of work on the head though haha :)). Removed the design on the body, and replaced it with a koto part. And oh! Look! It can transform now! haha! I also added wings on the shoulder armor, still working on it. Till next update~
Post a Comment
Read more