WIP Strike Freedom [Full Burst Mode] [10]

Painted the left arm and started working on the wing unit of the SF :)

Painted the frame of the wing unit, and test-fitted it as soon as it dries up.

Then, started sealing the wing unit using a Plastic Cement and some Putty :)

The seamlines on this one are still visible, so I decided to put some putties on it again XD

Pictures after sanding :D

That's it for this update~
*I do hope I finish working on the wing units w/in the week lol*

Comments

What's Inside The Box: HG Shaldoll

Mr. Pink tried using 'Future' Pledge :D

I was looking for a cheap alternative for gloss topcoat to do my panel wash on my IJ since Bosny's Clear Gloss is too thick for me, and remembered that I saw on sir DC23's blog that he uses this Future Pledge to do the job, also, I asked sir T.V.A. *The Virgin Angel* with regards to using Pledge/Future for topcoating before panel wash..and I bought one right away XD..anyway, here are the photos of what I did on some scraps XD.. What I did was painted the part chrome and then, applied Future/Pledge on it.. Verdict: Seriously, it's so EASY to use. You don't have to do something like mix it with other stuffs before applying on the kit. You don't have to even worry about brush marks/strokes since it's self leveling. And it's shiny! XD So, if you guys are looking for a cheap alternative for your gloss coat, I highly recommend this one XD.. Till then! :D

HG Shaldoll Ver. Odium WIP #01

Did something to my HG Shaldoll :D (This is btw, our Brando Bell Group Build) First of, this is what I plan on doing on it's backpack. Next, I did some cutting on the backpack in order for me to attach the thing that will hold the TA's boosters. Then I trimmed down the part that will hold the Tactical Arm's boosters, so it can fit in. I then attached the boosters on the backpack of the Shaldoll. Next is, I worked on the head. The eye lens for me is too big, so I decided to make it a bit smaller somehow :). Using a .5mm HIPS (High Impact Plastic Sheets) I did this. Sanded the putty I applied, and primed it to see if there are still something to work on. Still needs a lot of work on the head though haha :)). Removed the design on the body, and replaced it with a koto part. And oh! Look! It can transform now! haha! I also added wings on the shoulder armor, still working on it. Till next update~

Mr. Pink

Search This Blog