Skip to main content

WIP MG IJ PT04

AH! YES! FINALLY! I'll be able to start working on this kit again XD..





Sanded the parts first before putting some putty...




Now...Time for some Putty session!!! Let's remove those nasty nubs! XD


Waited for them to dry up *3-4hrs*, and sanded the putty down XD..




Now, if you guys still remember on my last update..I already did some nubmark fixing on the chest armor parts..so, what I did earlier was paint them, only the black parts though..Painted them w/ Bosny Flat Black.. *sanded them first before painting*..




And! Installed those armor pieces on the frame :D..




That's it for this update! till next time! XD

Comments

  1. A CREATIVE MINDSeptember 13, 2011 at 4:33 PM

    bro, for the chrome frame, what brand of paint did you used?

    ReplyDelete
  2. NicholsSeptember 13, 2011 at 6:12 PM

    @Kakashi: I think he used Bosny Silver (not chrome) I also used Bosny Silver for an inner frame once, and it looks quite similar to this.

    ReplyDelete
  3. Niko Mr. PinkSeptember 15, 2011 at 2:10 AM

    @Kakashi
    I used Kobe Chrome for the paint bro XD..

    ReplyDelete
  4. AnonymousOctober 21, 2011 at 8:49 PM

    is that using a spray can paint?

    ReplyDelete
  5. Niko Mr. PinkOctober 26, 2011 at 8:30 PM

    ^yup, I'm using Bosny and Nikko Brand Spraycans :D

    ReplyDelete

Post a Comment

Popular posts from this blog

What's Inside The Box: HG Shaldoll

Post a Comment
Read more

Mr. Pink tried using 'Future' Pledge :D

I was looking for a cheap alternative for gloss topcoat to do my panel wash on my IJ since Bosny's Clear Gloss is too thick for me, and remembered that I saw on sir DC23's blog that he uses this Future Pledge to do the job, also, I asked sir T.V.A. *The Virgin Angel* with regards to using Pledge/Future for topcoating before panel wash..and I bought one right away XD..anyway, here are the photos of what I did on some scraps XD.. What I did was painted the part chrome and then, applied Future/Pledge on it.. Verdict: Seriously, it's so EASY to use. You don't have to do something like mix it with other stuffs before applying on the kit. You don't have to even worry about brush marks/strokes since it's self leveling. And it's shiny! XD So, if you guys are looking for a cheap alternative for your gloss coat, I highly recommend this one XD.. Till then! :D
2 comments
Read more

HG Shaldoll Ver. Odium WIP #01

Did something to my HG Shaldoll :D (This is btw, our Brando Bell Group Build) First of, this is what I plan on doing on it's backpack. Next, I did some cutting on the backpack in order for me to attach the thing that will hold the TA's boosters. Then I trimmed down the part that will hold the Tactical Arm's boosters, so it can fit in. I then attached the boosters on the backpack of the Shaldoll. Next is, I worked on the head. The eye lens for me is too big, so I decided to make it a bit smaller somehow :). Using a .5mm HIPS (High Impact Plastic Sheets) I did this. Sanded the putty I applied, and primed it to see if there are still something to work on. Still needs a lot of work on the head though haha :)). Removed the design on the body, and replaced it with a koto part. And oh! Look! It can transform now! haha! I also added wings on the shoulder armor, still working on it. Till next update~
Post a Comment
Read more